Dixon SBC500SSMNPT, Mann Tek Safety Break-Away Coupling, 5" Male NPT, 316 Stainless Steel, 1100 GPM, 360 PSI
项目#SBC500SSMNPT
Ships in 3-5 Business Days
SUBJECT TO MANUFACTURER AVAILABILITY
Details
Details
SBC500SSMNPT | Mann Tek Safety Break-Away Coupling Industrial Male NPT, 316 Stainless Steel, 5", 125 DN, NPT Connection, 13.8" Length, 360 PSI Rating, FKM/FPM Seal, 10.6" Width, Industrial Series, 1100 GPM (Gallons Per Minute).
| Brand | Dixon Valve & Coupling |
|---|---|
| MPN | SBC500SSMNPT |
| Product | Coupling |
| Series | Industrial Series |
| Size | 5" |
| Connection | NPT |
| PSI | 360 PSI |
| DN Size | 125 |
| Material | 316 Stainless Steel |
| Seal | FKM/FPM |
| Flow | 1100 GPM |
| Length | 13.8" |
| Width | 10.6" |
| Application | Coupling is designed to minimize spillage and damage associated with drive away and pull away incidents; Typical applications: loading rack |
| Features | Designed to be installed between a fixed point (pipe, pump, manifold) and a hose; coupling automatically senses an excessive load, closes the valves and disconnects; high flow rate / low pressure drop |
| Data | 360 PSI at 70°F |
| How it works | The safety break-away valve consists of two halves, each with a valve that has an O-ring seal. When the safety break-away couplings separate, it allows the valves to close. The two valves close rapidly, minimizing exposure to personnel and the environment; Safety break-away couplings have three external break bolts. In the case of axial tension all of the bolts take up the force corresponding to the break force on the hose with a safety margin. Non-axial forces concentrate the tension forces more strongly on one bolt, so that the safety break-away coupling reacts in a natural way to the reduction of the hose break forces. |
| Options | Also available in 150# Flange, BSP thread, DN Flange, 300# ASA Flange, Grooved Ends or any combination thereof. Consult Anderson Process for more information. Optional Non-closure Design available, Consult Anderson Process for more information. The non-closure design is an economical alternative which allows the coupling to break away due to pull-away/drive-away incidents thus protecting piping systems and equipment. The design allows spillage of product in these instances due to the lack of valving in the coupling. Useful applications where non-hazardous product is being conveyed and where there are no environmental concerns. |
| WARNING! | This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. Do not use in connection with drinking water. Wash hands after handling. For more information go to www.P65Warnings.ca.gov |
Related Documents
Reviews
Reviews
Write Your Own Review
